"The Liquid Sky 010 A robust beach charter suitable for half day excursions.
32ft Loa, 18ft beam, 5000lbs. The final cutter rig was a 36ft mast on a pedestal. Standing rigging was 5/16" 1x19 galvanized on 1/2" galvanized turnbuckles.
"The Liquid Sky 015 An aft an midsection before skinning with multiple layers of 1/8" plywood.
"The Liquid Sky 003 The trampolines were always a hit with lounging charter
passengers.
The yellow square is the top of the 8' swing daggerboard.
"The Liquid Sky 044 Interior of a hull
"The Liquid Sky 005 Looking aft between the two hulls.
"The Liquid Sky 008 The hulls were each built in three sections.
These are the bows being transported to another assembly location.
"The LiquidLiquid Sky 014 Bow sections at different stages of construction.
"The Liquid Sky 009 The first mast was a 50 ft rotating wing. The wingmast ultimately
proved unmanageable. In any kind of a good breeze the boat would sail
at 4 kts with with all sails down. Any breeze made navigating in
a marina or a narrow canal a challenge. At anchor, the boat
would sail back and forth, sometimes sailing over the anchor.
"The Liquid Sky 063 The 50' wing was replaced with a 36' aluminum mast from a marine salvage.
"The Liquid Sky 055 The first mast.Internal halyards were run in PVC pipe.
"The Liquid Sky 001 Korri Lampitt modeling for a brochure photo.
Foreground, the aluminum mast sat on a very robust stabilized
aluminum I beam pedestal.
"The Liquid Sky 002 Looking forward. Estero Bay, Fort Myers Florida.
"The Liquid Sky 004 Chuck Lawson as hunky sailor. Brochure photo.
"The Liquid Sky 007 "The Liquid Sky 012 View from the top of the 50' wing mast
"The Liquid Sky Framework for a midsection. In general the frame was a mold for the layers of 1/8" plywood skin.
"The Liquid Sky 018 Looking through and unfinished bowel section. Storage compartments and beyond that filled with styrofoam.
"The Liquid Sky 044 Interior of a hull
"The Liquid Sky This is an aft section upside down. Styrofoam flotation was built into aft and bow sections.
"The Liquid Sky" The bows were sculpted with multiple layers, strips of 1/8" plywood.
"The Liquid Sky Bow sections
"The Liquid Sky First layers of 1/8" strips on the bow.
"The Liquid Sky An aft section.
"The Liquid Sky "The Liquid Sky "The Liquid Sky 023 "The Liquid Sky 024 "The Liquid Sky 025 "The Liquid Sky 026 "The Liquid Sky 027 "The Liquid Sky 028 "The Liquid Sky 030 "The Liquid Sky 031 "The Liquid Sky 032 "The Liquid Sky "The Liquid Sky 034 "The Liquid Sky 035 "The Liquid Sky 036 "The Liquid Sky "The Liquid Sky 038 "The Liquid Sky "The Liquid Sky 040 "The Liquid Sky 041 "The Liquid Sky 042 "The Liquid Sky 043
"The Liquid Sky 044 "The Liquid Sky 045 "The Liquid Sky 046 "The Liquid Sky 047 "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky "The Liquid Sky
